PLC water flow meter diesel flowmeter liquid turbine flow meter sensor transmitter lwgy 40 threaded connection

PLC water flow meter diesel flowmeter liquid turbine flow meter sensor transmitter lwgy 40 threaded connection
  • Продавец
  • Список ценUS $216.19piece
  • Продажная ценаUS $216.19piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,1 (550)

Oписание продукта

Product Name: Electronic display cast aluminum oval gear flowmeter
Model: OGM-25
Min.Flow Rate20L/min
Max.Flow Rate120L/min
Max.Operating Pressure1.8MPa
Model OGM-25
Nominal diameter 1"
Minimum flow rate L/min 12
Maximum flow rate L/min 120
Measurement accuracy ±0.5%
Repeatability ±0.3%
Large amount of viscosity 1000CPS
Maximum working pressure 1.8MPa
Single count 0.00-9999.9
The total number of accumulated 0.00-999999.9
Second, the key operation instructions
1. Power on: Press START key to start, or the sensor will start automatically when there is metering pulse signal. This meter will automatically shut down in 1 minute without any operation.
2. Single data clear: Press the CLEAR button in the normal state to clear the single fuel data.
3. To view the total accumulation: Press the TOTAL button for 5 seconds under the normal state of view. At this time, the TOTAL word appears at the top of the line. The total value is displayed afterwards and automatically returns after 3 seconds.
4. Single Cumulative Clear: Press the TOTAL button for 5 seconds under normal display state to display the total accumulation, then press the TOTAL button, and then accumulate a single flash, press the CLEAR button to clear the single accumulation.
working principle
1. The flow meter is installed at the oil outlet of the oil pump. If it is installed in the oil inlet, the pressure of the filter will be damaged, which will increase the negative pressure of the oil pump, making the flow meter measurement inaccurate, and the import and export of the pump also need to be completely sealed. Otherwise it will make the meter inaccurate.
2. The filter should be installed at the front of the flowmeter to prevent particles larger than 0.2MM from passing through, in order to prevent the flowmeter from jamming or blocking due to particulate surfaces. The filter should be cleaned frequently.
3. The flow meter should be equipped with a one-way valve, so that the pipeline liquid can only flow in one direction, to prevent the meter gear from reversing, or idle to make the flow meter measurement inaccurate.
4. The flowmeter should be properly installed. The display screen of the flowmeter should be installed upwards or at 90 degrees. It should not be installed diagonally.
5. The installation direction of the flowmeter should make the direction of the arrow shown on the flowmeter housing be the same as the direction of the liquid, and the installation position should pay attention to ease of reading.
6. Flowmeter pressure loss is proportional to the liquid flow, the liquid viscosity increases, pressure loss also increases.
Error coefficient calibration
      In the standby state or the current filling amount display state, press the START key for 5 seconds to enter the error coefficient calibration state. The middle row is displayed in front of the E-simultaneous digit with the last digit blinking. Press the START button to shift the digits (flash digit shift). Press the CLEAR button to “add” and press the TOTAL button to “decrease” to modify the value of the current flashing digit. . When this coefficient increases, the oil output decreases, and the smaller the coefficient, the greater the oil output. Standby 5 seconds to complete the calibration of the error coefficient. Return to display the current fill status. After the error coefficient is calibrated, if there is a new measurement pulse input, the newly set error coefficient will be used for calibration. Error coefficient calibration range: 0000—20000. Each adjustment of a coefficient, the error of the flow meter plus oil is about 0.05%.
Unit of measure settings
Press the START key for 5 seconds in the standby mode or the current fill level display. Enter the error coefficient calibration state, press the START key four times to enter the unit conversion, the screen displays UN 4, press the CLEAR or TOTAL key, select
Cubic meter/→US gallon/US→gallon/GA→L/L→Kg/KG unit, and the cumulative amount is displayed in the current unit of measure. Press START twice or standby for 5 seconds to exit the unit conversion setting.
Cast aluminum oval gear flow meter used to transmit large viscosity range of liquid, and has a good repeatability and service life, compact structure, easy maintenance, easy to read and easy to operate mechanical. Horizontal or vertical installation flexibility, pressure loss is small, can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industrial and commercial.
OGM-25 aluminum oval gear meter has the ability to handle a wide range of fluid viscosities
with exceptional levels of repeatability and durability,applying in the petroleum,chemical,
food industry,etc. It has the traits of low pressure drop,compact sixe,easy maintenance,easy
to read and operate mechnical display,horizontally and vertically flexibility of installation
Please Note: 
 We have in stock all the time
 We send the package by " AliExpress Standard Shipping" , All packages have tracking number
 All products have 1 year guarantee
Batteries not included,  Except some product use lithium battery.
All product  include retail pack. if not have the retail box  , maybe the box is too hight , SO If you are reseller,please contact with us.
 We are not responsible for any custom duty or import tax.
about shipping 
Shipping around the world. (Except for some countries and APO / FPO)
2. Process the order in time after payment verification.
We only ship to the confirmed order address. Your order address must match your shipping address.
4. The displayed image is not an actual item and is for reference only.
5. Service transit time provided by the carrier, excluding weekends and holidays. The traffic time may vary, especially during the holiday season.
6. If you do not receive the shipment within 30 days of payment, please contact us. We will track the goods and reply to you as soon as possible. Our goal is customer satisfaction!
7. Due to the stock status and time difference, we will choose to ship from our first available warehouse for quick delivery.
return or refund 
1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4.  We will bear all the shipping cost if the product(s) is (are) not as advertised.
about feedback :
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!