Forged Connecting Rods For VW Golf MK4 Gti 1.8T 2.0L H beam Conrod 800HP Rod 4340 EN24 Floating Balanced Crankshaft Piston Pin

Forged Connecting Rods For VW Golf MK4 Gti 1.8T 2.0L H beam Conrod 800HP Rod 4340 EN24 Floating Balanced Crankshaft Piston Pin
  • Продавецnewyorkjetsvsmiamidolphins.us
  • Список ценUS $210.00piece
  • Продажная ценаUS $210.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,8 (680)

Oписание продукта

TB Racing Forged Connecting Rods For JDM Honda Civic CRX D16 D Series Conrod 4340 Forged H Beam rally

*Important note:

Please be kindly reminded that you may need to notch the block when fit to D16Y7, D16Y8, D16Z6 engines.

Please consider this before purchasing. If there is any questions, please feel free to contact us

 

Application: For JDM Honda Civic CRX D16 ZC SOHC VTEC D Series Engine

Material: Forged 5140 aircraft chrome moly quality steel

Quantity: 1 set of 4 Pieces(without bolts) 

Tolerance: Set balanced to +/- 1 gram

Pin design: Bronzed bushing floating pin

Warranty: Limited lifetime warranty

 

Specifications: 

Center to center length: 5.394" (137mm) 

Big end diameter: 1.890" (48mm) 

Small end diameter: 0.748" (19mm) 

Big end width: 0.898" (22.8mm)

Small end width: 0.717" (18.2mm)

Note: Without 3/8 size bolts

 

Our Rods are rated for 800+BHP and 9000RPM
These rods are quality rods with TUV Certification. 

 

 

Q: Why do we choose ARP rods bolts?

 

A: Rod bolt is unquestionably a very important fastener in the engine; they hold the key to the entire rotating assembly. It secure the connecting rod and bearing to the crankshaft. A weak rod bolt in a racing engine means catastrophic disaster and will put your life at risk. The weak rod bolts would broke when the engine run at high rpm, it will cause a instant failure of the race and the lost of an expensive engine.We only use and sell ARP rod bolts. As ARP is the world leader in the racing fastener. It is the priority choice in the high performance racing parts industry for its strong resistance under the high temperature and rpms. Racing professionals only use ARP bolts to ensure the strength and reliability of their engine. If you need the ARP2000 or ARP L19 rod bolts please contact us.

 

Q: Why is it so important to choose the right bolts for the conrods?

 

A: If you do not plan to change a new engine, then be ware of the bolts you will use. The fake bolts will never last under 400HP or higher. And when it breaks, you will be more than regret of not choosing the right one. All our conrods are equipped with genuine ARP2000 or ARP L19 bolts for different projects. We care about your engine as much as you do. Just tell us what you need, and we will make everything right for you.



 

 


 

aeProduct.getSubject()

aeProduct.getSubject()

 

Super